TECHNICAL DATA
| Power supply | 10..40 Vdc, 19..28 Vac (@50..60 Hz) |
| Power consumption | 2,5 W |
| Insulation | 1.500 Vac a 3 vie |
| Accuracy class | 0,01% |
| Status LED | Power supply Error Tx Data Rx Data |
| Connections | Removable screw terminals for conductors up to 2.5 mm² MicroUSB port on front panel |
| Interfaces | RS485 2 wires, speed up to 115.200 bps |
| Supported protocols | ModBUS RTU slave |
| Input channels | 1 analog channel for reading (and power supply) up to 4 (350 Ω) or 8 (1,000 Ω) strain gauge load cells, 4 or 6-wire connection, equivalent impedance 87 Ω 1DI tare calibration or weight threshold |
| Output channels | 1 analog retransmission channel of the net weight in current (0…20, 4…20 mA) or in voltage (0..5, 0..10 V); 1DO tare calibration or weight threshold |
| Measurement / Diagnostics
|
Sensitivity from 1 to 64 mV/V |
| Resolution
Bandwith |
24 bit
100 Hz |
| Thermal drift | 25 ppm/K |
| Data | EEPROM for configuration parameters, retention time 40 years |
| Programming | Plug&Play configurator (EASY SETUP) System software (Z-NET4) DIP-switch |
| Protection degree | IP20 |
| Mounting | For DIN rail guide 35 mm DIN 46277 |
| Operating temperature | -10..+65°C |
| Dimension (WxHxD) | 17,5x100x112 mm |
| Weight | about 140 g |
| Housing | Nylon 6 preloaded 30% glass fibre, self-extinguishing class V0 |
| Standards | CE |
| Norms | EN 61000-6-4/2002, EN 61000-6-2/2002, EN 61010, EN 60742, IEC 61131 |
